Nikon D5200 (18-105mm Kit) Guia Do Utilizador

22

Press the shutter-release button halfway to 
focus. The active focus point will be displayed. If 
the subject is poorly lit, the flash may pop up and 
the AF-assist illuminator may light.

When the focus operation is complete, a beep 
will sound (a beep may not sound if the subject is 
moving) and the in-focus indicator (

I) will 

appear in the viewfinder.

While the shutter-release button is pressed 
halfway, the number of exposures that can be 
stored in the memory buffer (“

t”; 0 30) will be 

displayed in the viewfinder.

Smoothly press the shutter-release button the 
rest of the way down to release the shutter and 
record the photograph. The memory card access 
lamp will light and the photograph will be 
displayed in the monitor for a few seconds (the 
photo will automatically clear from the display 
when the shutter-release button is pressed 
halfway). Do not eject the memory card or remove 
or disconnect the power source until the lamp has 
gone out and recording is complete.

I

Subject in focus.

I (flashes)

Camera unable to focus using 
autofocus. See page 34.

A

The camera vibrates the low-pass filter covering the image sensor to remove dust when the 
camera is turned on or off (