Canon EOS50D28135 Manual Do Utilizador
107
E-TTL II autoflash obtains high-precision and consistent flash shots.
If necessary, the built-in flash will pop-up automatically in low-light
or backlit conditions. (except in <3> <5> <7> modes)
or backlit conditions. (except in <3> <5> <7> modes)
Regardless of the light level, you can press the <D> button to pop-up
and fire the built-in flash whenever desired. If the built-in flash has
popped up, you can push it back down with your fingers.
d
and fire the built-in flash whenever desired. If the built-in flash has
popped up, you can push it back down with your fingers.
d
: For fully automatic flash photography. The shutter speed (1/
250 sec. - 1/60 sec.) and aperture are set automatically.
s
: Enables you to set the desired shutter speed (1/ 250 sec. -
30 sec.). The flash exposure will be set automatically to match
the aperture that was set automatically.
the aperture that was set automatically.
f
: Enables you to set the desired aperture. The flash exposure
will be set automatically to match the aperture that was set. The
shutter speed will be set automatically between 1/250 sec. -
30 sec. to suit the scene’s brightness.
In low light, the main subject is exposed with the automatic
flash, and the background is exposed with a slow shutter speed
set automatically. Both the subject and background look
properly exposed (automatic slow-speed flash sync).
shutter speed will be set automatically between 1/250 sec. -
30 sec. to suit the scene’s brightness.
In low light, the main subject is exposed with the automatic
flash, and the background is exposed with a slow shutter speed
set automatically. Both the subject and background look
properly exposed (automatic slow-speed flash sync).
With slow shutter speeds, using a tripod is recommended.
If you do not want a slow shutter speed to be used, set
[8C.Fn I -7: Flash sync. speed in Av mode] to [1: 1/250-1/
60sec. auto] or [2: 1/250sec. (fixed)] (p.175).
[8C.Fn I -7: Flash sync. speed in Av mode] to [1: 1/250-1/
60sec. auto] or [2: 1/250sec. (fixed)] (p.175).
a
: You can set both the shutter speed (1/250 sec. - 30 sec.,
bulb) and aperture. The flash exposure will be set
automatically to match the aperture that was set. The
background exposure will vary depending on the shutter speed
and aperture.
automatically to match the aperture that was set. The
background exposure will vary depending on the shutter speed
and aperture.
8 : The flash result will be the same as the <d> mode.
Using the Built-in Flash
Using the Built-in Flash in the Basic Zone
Using the Built-in Flash in the Creative Zone
COP
Y