Canon G1X Mark II Manual Do Utilizador
92
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Movies
Face AiAF
•
Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
metering only), and white balance ([ ] only).
•
After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
•
When the camera detects movement, frames will follow moving subjects,
within a certain range.
within a certain range.
•
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
displayed around faces in focus.
•
When no faces are detected, or when only gray frames are
displayed (without a white frame), pressing the shutter button
halfway will display green frames in the areas in focus. Note that the
maximum number of frames depends on the aspect ratio (
displayed (without a white frame), pressing the shutter button
halfway will display green frames in the areas in focus. Note that the
maximum number of frames depends on the aspect ratio (
setting.
-
[
] or [
]: 31 frames
-
[
] or [
]: 25 frames
-
[
]: 21 frames
•
If faces are not detected when Servo AF (
AF frame is displayed in the center of the screen when you press
the shutter button halfway.
the shutter button halfway.
•
Examples of faces that cannot be detected:
-
Subjects that are distant or extremely close
-
Subjects that are dark or light
-
Faces in profile, at an angle, or partly hidden
•
The camera may misinterpret non-human subjects as faces.
•
No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
press the shutter button halfway.
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1
Configure the setting.
z
Press the <
n> button, choose
[Servo AF] on the [
4] tab, and then
2
Focus.
z
The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
•
Focusing may not be possible in some shooting conditions.
•
In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
•
If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
•
AF lock shooting is not available.
•
[AF-Point Zoom] on the [
4] tab
is not available.
•