Canon G1X Mark II Manual Do Utilizador

96

Still Images

You can change the flash mode to match the shooting scene. For details on 
the flash range, see “Flash Range” (

 

z

Move the <

h> switch.

 

z

Press the <

r> button, choose a flash 

mode (either press the <

q><r> buttons 

or turn the <

7> dial), and then press the 

<

m> button.

 

z

The option you configured is now 
displayed.

The setting screen cannot be accessed by pressing the <

r> button 

when the flash is lowered. Move the <

h> switch to raise the flash, 

then configure the setting.

If the flash fires, vignetting may occur.

Fires automatically in low-light conditions.

h] On

Fires for each shot.

Z] Slow Synchro

Fires to illuminate the main subject (such as people) while shooting at a 
slower shutter speed to illuminate backgrounds out of flash range.

In [

Z] mode, mount the camera on a tripod or take other measures 

to keep it still and prevent camera shake. Additionally, you should 
set [IS Mode] to [Off] when using a tripod or other means to secure 
the camera (

In [

Z] mode, even after the flash fires, ensure that the main subject 

does not move until the shutter sound is finished playing.

!] Off

For shooting without the flash.

If a blinking [

] icon is displayed when you press the shutter button 

halfway in camera-shake inducing, low-light conditions, mount the 
camera on a tripod or take other measures to keep it still.

Adjustment is also possible by pressing the <

r> button, touching the desired 

option, and then touching it again.