Kodak LS753 Manual Do Utilizador

 41

Slide Show does not 
run on an external 
video device

■

Adjust the camera Video Out setting (NTSC or PAL, 

).

■

Make sure the external device settings are correct 
(see the device’s user’s guide).

The picture is too dark 
or underexposed

■

Use Fill flash (

) or change your position so light is 

not behind the subject.

■

Move so that the distance between you and the subject is 
within the effective flash range (see 

).

■

To automatically set exposure and focus, press the Shutter 
button halfway and hold. When the ready light glows 
green, press the Shutter button completely down to 
take the picture.

■

Increase Exposure Compensation (

) and try again.

The picture is too light

■

Turn flash off (

■

Move so that the distance between you and the subject is 
within the effective flash range (see 

).

■

To automatically set exposure and focus, press the Shutter 
button halfway and hold. When the ready light glows 
green, press the Shutter button completely down to 
take the picture.

■

Decrease Exposure Compensation (

and try again.

■

Check if you are in Beach or Snow scene mode (

).

The picture is not clear

■

To automatically set exposure and focus, press the Shutter 
button halfway and hold. When the ready light glows 
green, gently press the Shutter button completely down 
to take the picture.

■

Clean the lens (

).

■

Make sure camera is not in Close-up mode if you are 
further than 39 in. (100 cm) from your subject.

■

Place the camera on a flat, steady surface or use a tripod.