Canon ZR200 Manual Do Utilizador

87

Transferring Video Recordings to a 
Computer

You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or 
IEEE1394 capture board. Use the editing software supplied with your computer/capture 
board to transfer video recording from tape to computer. Refer to the instruction manual of 
the software. A driver is preinstalled on Windows operating systems later than Windows 
98 Second Edition and Mac operating systems later than Mac OS 9, and will be installed 
automatically.

 Operation may not work correctly depending on the software and the 

specifications/settings of your computer.

 If the computer freezes while you have connected the camcorder, disconnect 

and reconnect the DV cable. If the problem persists, disconnect the interface 
cable, turn off camcorder and computer, turn camcorder and computer back on 
and reconnect them.

 Make sure that camcorder and computer are not connected with a USB cable 

before connecting the camcorder to the computer using the DV cable. 
Otherwise, the computer may not operate properly.

 We recommend powering the camcorder from a household power source while 

it is connected to the computer.

 Refer also to the instruction manual of the computer.
 Users of Windows XP can download the DV Messenger software from below 

homepage. With DV Messenger, you can perform a videoconference using your 
camcorder. For details, refer to the DV Network Software Instruction Manual
supplied with the software.
www.canondv.com
www.canon.ca
www.canon-asia.com

6-pin

Commercially available DV cable

IEEE1394 (DV) terminal

4-pin