Canon XC-10 Manual Do Utilizador

5

103

                                       

Playback

Playback

This section explains how to play back recordings with the camcorder. For details on playing back recordings 
using an external monitor, refer to 

Connecting to an External Monitor

 (A 115).

Playing Back Recordings

In playback mode, the thumbnails of clips and photos 
you have recorded are shown in index screens sorted 
by the type of recording.

1 While the camcorder is turned off, hold the ^ 

button pressed down.

• An index screen will appear. To change the index 

screen, refer to 

Changing the Index Screen

 

(A 104).

• If you hold the button pressed down again, the 

camcorder will switch to 

 or 

 mode, depending on the position of the movie/photo switch.

2 Touch the thumbnail of the desired recording to start playback.

• You can also use the joystick to select a recording.

• During playback, you can touch the screen or press the DISP. button to display the playback controls. You 

can use the touch panel or joystick to operate the playback controls.

Playing back clips

• Playback will start from the selected clip until the end of the last clip in the index screen.

• From the playback controls, touch [Ý] to pause playback or touch [Ñ] to stop playback and return to the 

index screen.

Playing back photos

• After the photo appears, drag your finger left/right to browse through the photos one by one.

• You can also use the joystick to browse through the photos.

• From the playback controls, touch [f] to return to the index screen.

Operating modes: