Canon XC-10 Manual Do Utilizador

Página de 167
Recording Audio
84
Microphone Attenuator (Built-in Microphone)
You can activate the microphone attenuator (20 dB) for the built-in 
microphone to prevent audio from being distorted if the audio level is too 
high.
1 Make  sure  ‘ [Audio Scene] is set to [„ Custom Setting] 
(A 81).
2 Press the MENU button.
3 Open the [Built-in Mic Att.] submenu.
[¡ Audio Setup] > [1] > [Built-in Mic Att.]
4 Select the desired option and then touch [X].
Options
Audio Equalizer (Built-in Microphone)
You can use the audio equalizer to adjust sound levels by specifically 
targeting one of the available frequency ranges.
1 Make  sure  ‘ [Audio Scene] is set to [„ Custom Setting] 
(A 81).
2 Press the MENU button.
3 Open the [Built-in Mic Freq. Response] submenu.
[¡ Audio Setup] > [1] > [Built-in Mic Freq. Response]
4 Select the desired option and then touch [X].
Options
[2 Automatic]: The camcorder will automatically activate the built-in microphone attenuator as necessary for optimal 
audio recording levels so high audio levels will not be distorted.
[i On]:
The built-in microphone attenuator will be activated at all times to reproduce more faithfully the sound 
dynamics. When you select this option, å will appear on the screen.
[j Off]:
The built-in microphone attenuator will be deactivated at all times. When you select this option, 
 will appear on the screen.
[h Normal]:
Appropriate for balanced sound under most normal recording conditions.
[ç Boost LF Range]:
Accentuates the low-frequency range for more powerful sound.
[è Low Cut Filter]:
Filters the low-frequency range to reduce the noise of blowing wind, a car’s engine and 
similar ambient sounds.
[é Boost MF Range]:
Best for recording human voices and dialog.
[ê Boost HF+LF Range]: Best, for example, for recording live music and clearly capture the special sound 
characteristics of a variety of instruments.
[¡ Audio Setup]
[1]
[Built-in Mic Att.]
[2 Automatic]
[¡ Audio Setup]
[1]
[Built-in Mic Freq. Response]
[
h
 Normal]