Canon XC-10 Manual Do Utilizador

91

Slow & Fast Motion Mode

                                       

Slow & Fast Motion Mode

This mode allows you to change the shooting frame rate to achieve a slow motion or fast motion effect during 
playback. Sound is not recorded in this special recording mode.

1 Touch the slow & fast motion button at the bottom right of the screen.

• Alternatively, you can use the [3 Recording Setup] > [1] > [Slow & Fast Motion] setting.

2 Select the desired slow/fast motion rate and then touch [K] or [X].

• Select [OFF Normal Recording] to turn off slow & fast motion recording.

• The slow/fast motion rate appears in the slow & fast motion button.

3 Press the START/STOP button to begin recording.

• The tally lamp illuminates.

4 Press the START/STOP button again to stop recording.

Available slow/fast motion rates

1

Not available when recording 4K clips. 

2

Clips recorded with this option will have a resolution of 1280x720 and a bit rate of 18 Mbps. Also, face detection & tracking will 
not be available.

NOTES

• Slow & fast motion recording cannot be used together with pre-recording mode.

• The slow/fast motion rate cannot be changed while recording.

• Clips will have a frame rate of 29.97P.

• Slow & fast motion recording will be deactivated if you change the video configuration.

• During slow & fast motion recording mode, the time code’s running mode (A 78) can be set to [Rec Run] or 

[Regen.] and the time code advances by the number of frames recorded. If the time code’s running mode is 
set to [Free Run], the running mode will switch to [Rec Run] during slow & fast motion recording mode. When 
slow & fast motion recording mode is deactivated, the running mode will return to its previous setting.

Operating modes:

x1/4

1, 2

x1/2

1

x2

x4

x10

x20

x60

x120

x1200