Canon HR10 Manual Do Utilizador
72
Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.
and playing back images to printing them.
Basic Recording
Taking Photos
1
Move the
switch to ON to
set the camcorder in CAMERA
mode.
mode.
The red CAMERA indicator will turn
on.
on.
2
Move the
/
switch to
(Still
images).
3
Press
halfway.
• Once the focus is automatically
adjusted,
will turn green and
one or more AF frames will appear.
• When you press
on the
wireless controller, the still image is
recorded immediately.
recorded immediately.
4
Press
fully.
The CARD access indicator will flash
as the still image is being recorded.
as the still image is being recorded.
IMPORTANT
Avoid the following actions while the card
access display (
access display (
) appears on screen,
and when the CARD access indicator is on
or flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to
or flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder to
vibrations or strong impacts.
- Do not open the memory card slot cover
and do not remove the memory card.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the position of the
/
switch or the operating mode.
NOTES
• If the subject is not suitable for
autofocus,
turns yellow. Adjust the
focus manually (
59).
• When the subject is too bright,
“OVEREXP.” starts flashing. In such
case, use the optional FS-H37U
ND filter.
case, use the optional FS-H37U
ND filter.
Basic Recording
Before using a memory card for the
first time, be sure to initialize it with
this camcorder (
first time, be sure to initialize it with
this camcorder (
84).
(
26)
PHOTO
PHOTO
PHOTO