Canon Optura 100 Manual Do Utilizador

119

Using a Memory Card

4. Select the desired setting.

• Your currently recording image is combined with the pre-recorded still

image.

5. Select MIX LEVEL.

6. Adjust the mix level.

• Turning the selector dial upwards adjusts to the right and turning

downwards adjusts to the left.

7. Close the menu.

• CARD MIX flashes in the display.

8. Press the card MIX button.

• CARD MIX stops flashing.
• Your currently recording image is combined with the pre-recorded still

image.

• Each time you press the card MIX button, your selection is activated

(display lights continuously) or deactivated (display flashes).

1. Press the start/stop button to start and stop recording.

• The combined images are recorded onto the cassette.

1. Press the PHOTO button halfway down and hold it.

•

F flashes white in the display as the camcorder adjusts the focus and it is
displayed continuously as a green mark when the camcorder is ready to take
the image.

2. Press the PHOTO button fully down to record the image to the

cassette.

•

F disappears from the display.

• The combined images are recorded onto the cassette for approximately 6

seconds (8 seconds in the

SP or

LP recording mode).

Notes:

• If you change the position of the POWER switch, select your still image for

Card Mix again.

• When setting Card Mix, you must carry out steps 1 to 4.

For stills

For movies

On/Off

5_OPTURA100 MC_E(99-125) 7/24/01 13:41 Page 119