Canon Optura 100 Manual Do Utilizador
![Canon](https://files.manualsbrain.com/attachments/4b6818c07b947b910f8cfb49338c2c63bdefaee1/common/fit/150/50/61ea34cb812b6780fe3b16f0b9221bd2f7635c65cee2473b66396d8b72cd/brand_logo.png)
135
E
Additional
Information
Troubleshooting
Cause and/or what to do about it
• The camcorder is not set to the
appropriate mode (
19, 28).
• The cassette is not loaded or is set for
erasure prevention (
17-18).
• The cassette has reached the end.
• The power source is not properly
• The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
(
exhausted or not properly attached
(
12-16, 129).
• The function cannot be used in that
recording program (
56).
• The camcorder was in record pause
mode for more than about 5 minutes
(
(
19, 103).
• The battery pack is exhausted
(
13-16, 129).
• The battery pack’s power is exhausted.
Recharge or change to a new battery
pack (
pack (
13-16).
• The cassette is not loaded or is set for
erasure prevention (
17-18).
• The cassette has reached the end.
• The camcorder is malfunctioning.
Remove and then replace power
source.
source.
• The camcorder is not set to the
appropriate mode (
19, 28).
• You are attempting to play back or
record copyright protected material
(
(
87).
• The video heads are badly
contaminated (
133).
Refer to this checklist first if you have any problems with your camcorder.
Possible explanations are given for each problem on the list — turn to the page
numbers in parentheses for more information.
Possible explanations are given for each problem on the list — turn to the page
numbers in parentheses for more information.
Make sure that the camcorder is properly connected if you are using it with a TV
or VCR. Consult your dealer or service outlet if problems persist.
or VCR. Consult your dealer or service outlet if problems persist.
Recording/Playback
Problem
? Nothing happens when I press the
buttons.
? The camcorder turned itself off.
? The cassette compartment stopped
mid-operation while
loading/unloading a cassette.
loading/unloading a cassette.
? The start/stop button doesn’t work.
?
The
mark flashes red in the
display during charging the flash.
? There’s no picture in the display.
? There’s a blank blue screen in the
display.
6_OPTURA100 MC_E(126-158) 7/24/01 13:42 Page 135