Canon MD 216 Manual Do Utilizador
46
External Connections
This chapter explains step-by-step how to connect your camcorder to
an external device such as a TV, VCR, or computer.
an external device such as a TV, VCR, or computer.
Connecting to a TV or VCR
Attaching the Ferrite Core
Attach the enclosed ferrite core before you connect the STV-250N Stereo Video
Cable to the camcorder.
Cable to the camcorder.
Attach the ferrite core to the cable about 10 cm from
the plug end (the plug to be connected to the
camcorder) of the STV-250N Stereo Video Cable.
Pass the cable through the centre of the core and wrap it
around the core, then close the unit until it clicks shut.
the plug end (the plug to be connected to the
camcorder) of the STV-250N Stereo Video Cable.
Pass the cable through the centre of the core and wrap it
around the core, then close the unit until it clicks shut.
Connecting to a TV or VCR
AV Terminal
Sound from the built-in speaker will be muted while
the STV-250N Stereo Video Cable is connected to the
camcorder.
the STV-250N Stereo Video Cable is connected to the
camcorder.
DV Terminal
• Check the type and orientation of the terminal and
make sure you connect the DV cable properly.
• Use the optional CV-150F (4 pin-4 pin) or CV-250F
(4 pin-6 pin) DV cable.
Open the LCD panel to
access.
access.
10 cm
CO
PY