Canon MD 216 Manual Do Utilizador
49
5
Connected device: Begin
recording when the scene you
wish to copy appears. Stop
recording when copying is
complete.
recording when the scene you
wish to copy appears. Stop
recording when copying is
complete.
6
This camcorder: Stop playback.
NOTES
• We recommend powering the
camcorder using the compact power
adapter.
adapter.
• When recording to a VCR using an
analog connection –connection type
or (
or (
47)–, the quality of the edited
tape will be lower than the original.
• When recording to a digital video
recorder using the DV terminal
–connection type
–connection type
(
- If the picture does not appear,
disconnect the DV cable and restore
the connection after a short while or
turn the camcorder off and then on
again.
the connection after a short while or
turn the camcorder off and then on
again.
- Proper operation cannot be
guaranteed for all digital devices
equipped with a DV terminal. If the
operation does not work, use the AV
terminal.
equipped with a DV terminal. If the
operation does not work, use the AV
terminal.
Audio Dubbing
You can add sound to a recording using
the built-in or an external microphone.
the built-in or an external microphone.
POINTS TO CHECK
You can only dub audio on tapes recorded
in SP mode with [
in SP mode with [
12bit] audio
(
39). This function is operated with the
wireless controller.
1
Locate the point where you want
to start dubbing audio.
to start dubbing audio.
Before locating the starting point,
you can also set the zero set
memory (
you can also set the zero set
memory (
33) at the point where
you want the audio dubbing to end.
The camcorder will automatically
stop audio dubbing at that point.
The camcorder will automatically
stop audio dubbing at that point.
2
Start playback and immediately
press .
press .
3
Press .
“AUDIO DUB.” and
appear.
4
Press
to begin dubbing.
Speak into the microphone.
1
3
2
(
19)
REW
PLAY
FF
STOP
PAUSE
SLOW
AUDIO DUB.
ZERO SET
MEMORY
TV SCREEN
STOP
PAUSE
AUDIO DUB.
PAUSE
AUDIO DUB.
PAUSE
CO
PY