Canon MD 216 Manual Do Utilizador

Additional Information

66

Moving the camcorder rapidly between 
hot and cold temperatures may cause 
condensation (water droplets) to form 
on its internal surfaces. Stop using the 
camcorder if condensation is detected. 
Continued use may damage the 
camcorder.

• When the camcorder is moved from 

an air-conditioned room to a warm, 
humid place

• When the camcorder is moved from a 

cold place to a warm room

• When the camcorder is left in a humid 

room

• When a cold room is heated rapidly

• Do not expose the camcorder to 

sudden or extreme changes in 
temperature.

• Remove the cassette, place the 

camcorder in an airtight plastic bag 
and let it adjust to temperature 
changes slowly before removing it 
from the bag.

• The camcorder automatically shuts 

off, the warning message 
“CONDENSATION HAS BEEN 
DETECTED” appears for approx. 
4 seconds and 

 starts flashing.

• If a cassette is loaded, the warning 

message “REMOVE THE CASSETTE” 
appears and 

 starts flashing. 

Remove the cassette immediately 
and leave the cassette compartment 
open. Leaving the cassette in the 
camcorder may damage the tape.

• A cassette cannot be loaded when 

condensation is detected.

The precise time required for water 
droplets to evaporate will vary 
depending on the location and weather 
conditions. After the condensation 
warning stops flashing, wait for 1 more 
hour before resuming use.

CO

PY