Moultrie I40XT Manual Do Utilizador

Open the camera case cover by unfastening the two cover clips on the right 

side of the cover.

Locate the battery compartments on each side of the LCD display.  Slide the 

battery compartment cover plates in the direction of the arrows and remove 

the cover plates.

Install six (6) C size Alkaline batteries with polarities as indicated on battery 

compartment (3 per side). Re-install the battery compartment cover plates 

securely.

Secure Camera to tree or pole using strap loops on back and provided Strap. 

Turn Camera on by sliding ON/OFF/AIM switch to the ON position. Press the 

MODE button one time to get to the Camera Setup Menu. Set Time and Date by 

pressing OK, using the UP or DOWN buttons to adjust selected field, the LEFT or 

RIGHT buttons to move to the next field and OK when done. 

Press MODE button until TRAIL CAM is displayed Your Camera will now 

automatically take pictures or video whenever an animal is detected in range 

-based on the default settings below.  

In time-lapse photography a series 

of still photos are taken at regular 

time intervals. The PlotStalker 

Software allows you to load the 

time lapse file that was captured 

from your Moultrie Game Camera 

and scroll backwards and forwards 

through your photos, single step, 

search for activity in a designated 

area, and save the files.

Computer: Intel® Pentium® 4 or AMD Athlon® 64 processor or above; 1GB 

RAM minimum; 100 MB hard disk space minimum.

Operating System: Microsoft® Windows® 32 bit - XP with Service Pack 2 or 

later; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with 

Service Pack 1; or Windows 7

Using standard Microsoft utilities (ex. File Explorer – My Computer), 

copy the PlotFiles (extension is .MLT) from the PLOT directory on the 

SD card to the hard disk drive in your computer. Note the location stored 

on the hard disk drive.  

Open the PlotStalker software application from the Windows Start Button 

menu. Once in the PlotStalker software, click on the File Button

Browse to the location in which you have saved the Plot file(s) 

(.MLT) in step 1 above, select the file of interest and click Open. 

Insert the PlotStalker CD into your computer and follow on-screen instructions.

Goes to the first or last photo in the Plot File. 

Individually step forward or backward through each photo.

Play photos in sequence, pause, or play the photos in reverse order.  

These functions simulate a video and are useful for manually searching 

for changes in the photos. When a sequence is being played, press 

fast-forward or fast-rewind multiple times to increase speed. (1x-5x)

Capture Mode 

Trail Cam (still)

 

Photo Quality 

High 

Photo Delay after each photo is taken 

1 minute 

Multi Shot Count 

1-Shot 

Video Resolution 

High 

Video Length 

5 seconds  

Camera Name 

MYCAMERA 

Temperature 

Fahrenheit 

IR Test 

OFF 

Info Strip printed on photos 

ON 

Default Settings 

NO 

Delete All 

NO 

Flash 

ON 

I40XT GameSpy Digital Camera

PlotStalker Software

PlotStalker Software

I40XT GameSpy Digital Camera

Enables you to customize the operation of your camera - refer to the 

CAMERA SETUP section of this manual.  The camera automatically goes 

into the mode you have selected, below, after 90 seconds of inactivity.

Still photos taken when an animal is detected. The number of photos taken 

when an animal is detected is configurable in Settings. Photos are stored in 

the in the DCIM/100_MDGC folder on the SD card.

The camera takes photos at a specified interval during the day and combines 

them together to create a Plot Video (*.MLT file) which can be viewed on the 

supplied Moultrie Plot Stalker software.  The camera takes a Plot Video twice 

a day; once in the morning and once in the evening.  The morning Plot Video 

begins 30 min before sunrise.  The evening Plot Video ends 30 min after 

sunset.  See chart below as a reference.  The length of each Plot Video is 

determined by the Plot Duration setting in the camera menu.  The camera will 

detect the correct sunrise and sunset times automatically and adjust itself 

accordingly.  The Plot Videos are stored in :/PLOT folder on the SD card.

 

IMPORTANT:  It will take the camera 24hrs to properly adjust to the correct sunrise 

and sunset times.  As a default the camera will start the morning Plot Video at 5:30am 

and end the evening video at 6:30pm.  To reset the sunrise and sunset times back to the 

default times, use the Default Settings option in the menu.

The GameSpy offers several modes of operation as described below. The camera 

is in Trail Cam Mode by default.

Camera operates in Plot Cam mode during the day and Trail Cam Mode during 

the night. Thirty minutes after dusk the camera will enter the Trail Cam mode 

and take night photos when the PIR sensor is triggered.

Camera records a user video when an animal is detected during daylight. 

The video length is configurable in Settings.

{

2/9/2010

1. Plug provided USB cable into the USB port on your 

Windows 7/Vista/XP computer.

2. Plug other end of USB cable into the camera's USB port.

3. To access JPG pictures and AVI movie files, navigate to "My Computer" and 

double click the "Moultrie CAM" drive.  Picture files will be stored In the 

DCIM directory; video files are located in the DCIM directory.

4. To exit USB mode, follow Window's instructions for properly disconnecting 

a removable drive and then unplug