Casablanca Fan Company 89UXXM Manual Do Utilizador

To start the fan. Press the selected speed button to run the fan at the desired speed.

To turn off the fan. Press the 

FAN OFF  button.

To reverse the airflow press the 

REVERSE button. Reverse operates at any speed whether fan 

is on or off. The fan returns to its set speed after reversing.

Turn the light on or off independently from the fan by pressing the 

LIgHT button.  Keep 

pressing the button in excess of 0.7 seconds, it becomes a dimmer. The light varies from 

‘bright’ to ‘dim’ over approximately 8 seconds. This sequence will reverse the light when it 

reaches the brightest or dimmest level if you continue to hold the 

LIgHT button. Release 

the button when the desired level is reached.

The last light function and fan speed will resume when power is turned back on.

Quick (pressing less than 0.7 seconds) on/off operation of the 

LIgHT button maintains the 

desired brightness level set previously.  

Versa•Touch2 ♦ IF FAN DOES NOT WORK

Step 1. Check to make sure that batteries are installed correctly 

in the control.

Step 2. Turn the power off to the fan (from the circuit breaker) 

for at least 5 seconds.

Step 3. Turn the power back on (at the circuit breaker) and push 

the Hi, Med, and Low buttons–in that order–within 20 seconds.

Step 4. The fan should now function properly.

Versa•Touch2 ♦ CHANgINg FREQUENCY SETTINg

you will only have to change the dip switch settings in the remote if 

you are using more than one fan in the same area and want to control 

them separately.

Step 1. At the circuit breaker or fuse box, turn the power off for the 

fan you want to change.
Step 2. Open the battery door of the Versa•Touch control and remove

the batteries.
Step 3. Change the dip switch settings, assuring that they are different 

from the previously installed Versa•Touch fan.
Step 4. Re-install the batteries and the battery door on the control.
Step 5. At the circuit breaker or fuse box, turn the power back on for 

the fan whose frequency you are changing.
Step 6. Within 20 seconds of restoring power, push the Hi, Med, and 

Lo buttons (in that order).