Canon Power Shot A400 Manual Do Utilizador
104
Various Functions
3
Plug the other ends of the AV
cable to the video in and audio in
jacks on the TV.
cable to the video in and audio in
jacks on the TV.
4
Turn on the TV and switch it to
Video mode.
Video mode.
5
Set the mode switch to Shooting
mode or Playback mode.
mode or Playback mode.
6
Turn on the camera (p. 23).
z The image will appear on the TV. Shoot or
playback images as usual.
z If the images are not appearing on the TV
when shooting, press the DISP. button.
Yellow Plug to the Video In Jack
Black Plug to the Audio In Jack
z No image will appear on the LCD
monitor when the camera is connected
to a TV monitor.
to a TV monitor.
z If the TV is a stereo model, you can plug
the audio plug into either the left or right
Audio In jack. Please refer to the TV’s
manual for details.
Audio In jack. Please refer to the TV’s
manual for details.
z A TV set cannot be used in
,
mode.
z The video output signal can be switched
(NTSC or PAL) to accommodate
different regional standards (p. 70). The
default setting varies between regions.
- NTSC:Japan, U.S.A., Canada, Taiwan,
different regional standards (p. 70). The
default setting varies between regions.
- NTSC:Japan, U.S.A., Canada, Taiwan,
etc.
- PAL: Europe, Asia (excluding
Taiwan), Oceania, etc.
If the video system is set incorrectly, the
camera output may not display properly.
camera output may not display properly.