Canon Power Shot A400 Manual Do Utilizador

Página de 142
123
Appendix
z Since storing a fully charged battery for 
long periods of time (about one year) 
can shorten its lifecycle or affect 
performance, you are recommended to 
use the battery in the camera until it is 
completely discharged and to store it at 
normal temperature (23 °C/73 °F or 
less). If you do not use the battery for 
long periods of time, charge it fully and 
discharge it fully in the camera at least 
once a year before returning it to 
storage.
z If battery usage time is considerably low 
despite their terminals' being wiped and 
the battery charger's indicator remaining 
lit, it is possible that the batteries have 
reached the end of their lifespan. Switch 
to different, unused batteries. If you are 
purchasing new batteries, look for 
Canon AA-size NiMH batteries.
z Leaving batteries in the camera or 
charger may damage it causing battery 
leakage. Remove batteries from the 
camera or charger and store in a dry 
cool location when not in use.
z It takes approximately 110 minutes when 
two batteries are loaded one at each 
end of the charger and 250 minutes with 
four for the charger to fully recharge 
them (as determined by testing at Canon 
facilities). Please do not charge batteries 
in areas where the temperature is 
outside the range of 0 to 35 °C (32 to 
95 °F).
z Charging time varies according to 
ambient temperature and to the 
batteries' initial charge state.
z The battery charger may emit noise 
while charging. This is not a malfunction.
z You can also use Battery/Charger Kit 
CBK100. For Battery/Charger Kit 
CBK100, use Canon AA-size NiMH 
batteries NB-1AH.