Canon Power Shot A400 Manual Do Utilizador

32

Shooting – The Basics

• Two beeps will sound when the camera has 

finished metering, and the indicator will light 
green or orange. If the LCD monitor is on, 
the AF frame will appear green.

• The indicator will blink yellow and the beep 

will sound one time if the subject is difficult 
to focus.

Pressing Fully
Pressing fully releases 
the shutter.

• You will hear the shutter sound when the 

shot is complete. Do not move the camera 
until you hear this sound.

• The indicator next to the viewfinder blinks 

green while data is recorded onto the SD 
card.

• The picture appears for three seconds on 

the LCD monitor, if it is on.

z Functions Available in Each Shooting 

Mode (p. 138).

z With the Review function, you can 

change the length of time images show 
on the LCD monitor after shooting, or set 
it so they do not show at all (p. 35).

z If the orange or yellow indicator blinks 

while you press halfway, you can still 
press fully to take the shot.

z Images are first saved into the camera's 

internal memory before being recorded 
onto the SD card, allowing the next 
images to be taken immediately as long 
as sufficient space is available in the 
internal memory.

z The beep and shutter sound can be set 

On/Off in the Set up menu (p. 67).

z Even when the shutter sound is set to 

[

, 

, 

(On)] (p. 71), no sound will 

be heard if [Mute] is set to [On]. 

z There is no shutter sound in movie 

mode.

z Shots cannot be taken while the flash is 

charging.