Canon Power Shot A400 Manual Do Utilizador

40

Shooting – The Basics

z You can switch between settings by pressing 

the  

button.

z This operation may not work in certain 

Shooting modes (p. 138).

z The flash will fire if the indicator beside the 

viewfinder lights orange when the shutter 
button is pressed halfway. (Does not fire in 

.)

z Shooting procedures are the same as for the 

Auto Mode (p. 31).

z If the flash is used in macro mode, the 

light may not be controlled correctly. In 
this case, set a higher ISO sensitivity or 
use other light sources instead of using 
the flash.

 

         

 

         

               

              

z When shooting with a high ISO 

sensitivity and using the flash, there is 
more of a chance of overexposure the 
closer you are to the subject.

z Please note that a slow shutter speed 

will be selected in dark places or when 
the flash is set to off. Be careful to avoid 
camera shake under these conditions.
Shooting in 

Be careful to hold the camera still to 
avoid camera shake.

 or 

 

Fix the camera to a tripod since the 
shutter speed will be slower than in the 

 mode. If an image is dark in 

 

mode, reshooting in 

 mode will 

make it brighter.

z The flash may take approximately 10 

seconds to charge. The LCD monitor, if 
it is on, will go off after the indicator 
blinks orange while recharging. The 
LCD monitor will come back on after the 
indicator lights a steady orange when 
recharging is completed. Recharging 
time may vary according to shooting 
conditions and battery charge levels.