Casio EX-TR100 Manual Do Utilizador

79

Using the Camera with a Computer

The camera will turn on 
automatically and battery 
charging will start (page 20).

• The camera may not turn 

on automatically in the 
case of certain computer 
models or connection 
conditions. If this 
happens, press [p] 
(Power) to turn on the 
camera.

• Make sure that you insert 

the cable connector into 
the USB port until you 
feel it click securely into place. Failure to insert the connector fully can result in 
poor communication or malfunction.

• Note that even while the connector is fully inserted, you 

still will be able to see the metal part of the connector as 
shown in the illustration.

• When connecting the USB cable to a USB port, make 

sure you align the connector correctly with the port.

• Your computer may not be able to recognize the 

camera if you connect via a USB hub. Always connect 
directly to the computer’s USB port.

• The first time you connect the camera to your computer with the USB cable, an 

error message may appear on your computer. If this happens, disconnect and 
then reconnect the USB cable.

• Your computer recognizes the memory card loaded in the camera (or built-in 

memory if there is no card) as a removable disk.

USB port

USB cable (included)

[USB] port

Large connector

Small connector

Making sure that the 8 mark on the USB cable 
connector is towards the side opposite that of the 
monitor screen, connect the cable to the camera.