Califone DC596 Manual Do Utilizador

 

20                   DiggiDitto™  DC596—Smart Camera with Image Recognition 

 

DiggiDitto™  DC596—Smart Camera with Image Recognition                          21

The Main Toolbar in the Camera tab has the following buttons:

   

Prints the image displayed on the 

screen via the default printer. When a 

moving image is displayed on-screen, 

the computer freezes the frame and 

sends it over to the printer. However, 

when the window is split, or when the 

image is rotated, the original image (not 

the split or rotated image) is printed.

  

Splits the screen in two, showing the 

captured image on the left and the 

original image on the right. This is a 

good mode to compare one image to 

another.

  

Automatically refocuses the image.

  

To freeze the movement in front of  

the camera. This can also be done by 

pressing the F5 key.

 

To create a still image and make 

corrections i.e., crop, flip, sharpen, 

brighten, etc.

  

Record Movie To make a simple movie clip of 10 

minutes or less. When going to the 

movie recording screen, the resolution 

changes to 640 × 480.  For a smaller 

footprint, try going down to 320 × 240.

  

Zoom-in functionality. May also press 

the “+” key.

  

Zoom-out functionality.  May also press 

the “-“ key.

  

Rotates the image 90 degrees to the 

right.

   

To write on-screen as you would on a 

blackboard.

  

Enlarges the screen to fit the monitor. 

Pressing <Ctrl-Enter> does the same. 

Press it again to restore it to the 

original size. 

   

Lock/Unlock Locks the toolbar. Notice that the Lock 

icon is grayed out when first launched; 

it becomes golden (active) when the 

screen is enlarged to fit the monitor. 

Click it to unlock the toolbar so as 

to hide the toolbar when moving the 

mouse pointer away from the toolbar.

 

Changes the position of  the toolbar, 

from the top of  the screen to the 

bottom. The toolbar cannot move 

sideways. (shortcut: Ctrl-M)