Elmo P100HD Manual Do Utilizador

N o t e

• To enable the access to this camera system on the web browser, the PC environment should

be as follows:

- Windows XP (SP2 or later) / Vista / 7 / 8 has been installed.
- JRE (Java Runtime Environment) 1.6.0_29 or later has been installed, and Java (Sun) is

valid.

- Internet Explorer6 or later has been installed.

• This camera system does not guarantee normal access operation on all web browsers.
• Depending on the version of the OS, the window size may not be set properly and the scroll

bar may be displayed.

• Depending on the settings of the Windows or virus check software, loss of connection to the

camera and distorted video image, could occur. In this situation, adjust the settings properly
following the Windows instruction manual or the virus check software.

• This product uses port HTTP:80 and TCP:50000 (Default setting) for LIVE (Video image

display).When this product is connected to a router, firewall, etc., set the port accordingly.

• Live and Capture can not be displayed during SD mode.

Live and Capture can not be displayed during recording.
Live and Capture can not be displayed during play back movie.
Live and Capture can not be displayed while the Compare Picture function is in operation.

• This product can be remote-controlled or the status of this product can be obtained by using

the remote control(CGI). For further information such as the commands, contact the dealer
from whom you have purchased this product or our branch/office near your location.

•

Default setting of the browser address is “http://192.168.0.100”. Set the IP address to be

used with the [SET UP] in the Network configuration.

• When the resolution settings are changed, restart the browser.
• Changes made to the network settings of IP address, subnet mask, default gateway, port

number or password, become effective after the product is restarted.