Clover Electronics HDC553 Manual Do Utilizador

•  To avoid electrical shock, do not open the case of this product. 
•  Do not stamp fingerprints on the window for lens. 
•  Operate this product using only the supplied AC Power supply. 
•  Do not overload electrical outlets or extension cords; this can result in fire or electric 

shock. 

•  Keep this product away from strong magnetic fields. 
•  Do not expose this product in direct sunlight or strong reflected rays. 
•  Refer servicing to qualified personnel only. 
•  Do not change or modify this product, the warranty will be voided. 
 
 
 
 
 
•  Weatherproof (IP67) 
•  1/3” Sony Super HAD CCD 

•  High Resolution 550 TV Lines (Color), 600 TV Lines (B/W) 

•  True Day/Night (Built-in ICR: IR Cut Filter Removal)  
•  On Screen Display (OSD) 

•  3D DNR (Digital Noise Reduction) with 3D filter 

•  D-WDR (Digital Wide Dynamic Range) 
•  Built-in Heaters 

•  Total 112 Infrared LEDs with a CDS sensor 

•  Up to 260’ IR range (depends on scene reflection) 
•  DC Auto Iris Vari-focal Lens (5-50mm) 

•  Attached Universal Mounting Bracket and 100’ cable 

•  Dual Voltage(AC 24V/DC 12V) 
 
 
 
 
1.  Get rid of the sun-visor① by turning the screw counter-clockwise on it. 
2.  Attach the mounting bracket base② to the wall or ceiling, wherever you want to 

install the camera. Locate a wall stud or ceiling joist and secure the bracket base② 
using the supplied screws③. Attach the mounting bracket④ to the mounting base② 
and secure them using the supplied screws⑤. 

3.  Lock the mounting bracket with the locking ring⑥. 
4.  Turn the pivot locking screw⑦ with the provided hex-head wrench counter-

clockwise to set the desired angle of camera toward objects and turn it clockwise to 
secure. It can be used for wall-mount or ceiling-mount application depending on 
setting this pivot locking screw.