Yamaha BD-A1040 Manual Do Utilizador
36
En
SETUP menu
Network
Connection setting
You can select a network connection method.
Information
You can display network information screen. On this
screen, you can view the information of Interface
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
screen, you can view the information of Interface
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
Connection Test
You can perform an internet connection test. If the test is
failed, please check “IP Setting” (p. 36) and perform the
test again.
failed, please check “IP Setting” (p. 36) and perform the
test again.
IP Setting
You can configure the network settings.
– Numeric keys Enters characters.
–
–
2/3
Moves the highlight.
– CLEAR
Deletes a character.
– ENTER
Saves the settings and exits from
the menu.
the menu.
Proxy Setting
You can set Proxy Setting. Set to Disable for normal use.
Set to Enable to set the proxy setting.
Set to Enable to set the proxy setting.
Network Control
Sets the control for devices, which are connected via
Ethernet, to On/Off. When On with filter is selected, you
can specify the MAC addresses of the network devices
that will be permitted access to this Player. This Player
employs Yamaha Network Control protocol (YNC).
Ethernet, to On/Off. When On with filter is selected, you
can specify the MAC addresses of the network devices
that will be permitted access to this Player. This Player
employs Yamaha Network Control protocol (YNC).
On
*
, On with filter, Off
– When Network Control is enable, power
consumption during standby mode increases due to
network control function.
network control function.
– When set to On, the system startup time is
decreased.
Network Standby
You can select whether this Player can be turned on from
other network devices such as “AV CONTROLLER”
(p. 26).
other network devices such as “AV CONTROLLER”
(p. 26).
On, Off
*
– This setting is available only when Network Control
is enabled.
DMC Control
You can select whether to allow DLNA-compatible
Digital Media Controller (DMC) (p. 16) to control this
Player.
Digital Media Controller (DMC) (p. 16) to control this
Player.
Enable
*
, Disable
BD-Live Connection
You can set access restriction to BD-Live contents.
Wired*
Connects the network using Ethernet.
Wireless
Connects the network using a wireless LAN.
You can select settings for a wireless LAN
connection. Follow the on-screen instructions to
proceed.
You can select settings for a wireless LAN
connection. Follow the on-screen instructions to
proceed.
Scan
Searches for an access point. You can connect the
access point that is found.
Searches for an access point. You can connect the
access point that is found.
Manual
You can manually set information for an access
point.
You can manually set information for an access
point.
Auto
If your access point supports the WPS (Wi-Fi
Protected Setup) function, you can use the auto setup
method to connect this Player to the access point
without entering information manually. Select PBC
(Push Button Configuration) or PIN code method.
If your access point supports the WPS (Wi-Fi
Protected Setup) function, you can use the auto setup
method to connect this Player to the access point
without entering information manually. Select PBC
(Push Button Configuration) or PIN code method.
Auto*
Select to automatically configure the network
settings of this Player with the DHCP server.
settings of this Player with the DHCP server.
Manual
Select to configure the network settings (IP Address,
Subnet Mask, Default Gateway, and DNS) manually.
Subnet Mask, Default Gateway, and DNS) manually.
Hints
Disable
*
Sets proxy server to disable. Select this item when
proxy server is not used.
proxy server is not used.
Enable
Enables proxy host and proxy port setting.
Proxy Host
Sets proxy host.
Proxy Port
Sets proxy port.
Notes
Note
Permitted
Allows all BD-Live discs to connect the network.
Partial
Permitted
Permitted
*
Allows only discs with owner certification.
Prohibited
Prohibits all BD-Live discs to connect the network.