Yamaha BD-A1040BL Manual Do Utilizador

– Change both batteries when the operation range of 

the remote control decreases.

– Use AAA, R03, UM-4 batteries.
– Make sure that the polarities are correct. Refer to the 

illustration inside the battery compartment.

– Remove the batteries if the remote control is not to 

be used for an extended period of time.

– Do not use old batteries together with new ones.
– Do not use different types of batteries (such as 

alkaline and manganese batteries) together. Read the 
packaging carefully as these different types of 
batteries may have the same shape and color.

– If the batteries have leaked, dispose of them 

immediately. Avoid touching the leaked material or 
letting it come into contact with clothing, etc. Clean 
the battery compartment thoroughly before installing 
new batteries.

– Do not throw away batteries with general house 

waste; dispose of them correctly in accordance with 
your local regulations.

– Keep batteries away from children. If a battery is 

accidentally swallowed, contact your doctor 
immediately.

– When not planning to use the remote control for long 

periods of time, remove the batteries from the 
remote control.

– Do not charge or disassemble the supplied batteries.

When using multiple Yamaha products, the remote control 
may work on another Yamaha product or another remote 
control may work on this Player. In this case, change the 
remote control ID to prevent unwanted operation. If you 
have changed the remote control ID, make sure that you 
select the same ID for the main unit.
The default setting is ID1.

To change the ID from ID1 to ID2, press and hold 
the red color button and 2 of number button 
simultaneously for 7 seconds. To change the ID 
from ID2 to ID1, press and hold the red color button 
and 1 of number button simultaneously for 7 
seconds.

Press and hold 

 and 

 on the 

front panel simultaneously for 2 seconds to display 
current ID when:
– No disc is inserted in this Player.
– The disc tray is closed.
– Playback is stopped.
– “NO DISC” is displayed on the front panel 

display.

Keep pressing and holding the keys for another 2 
seconds to change the ID between ID1 and ID2.

– If the remote control is without batteries for a few 

minutes or if exhausted batteries remain in the 
remote control, the remote control ID is 
automatically set to ID1. If you want to use the 
remote control in ID2 setting, install new batteries 
and set the remote control ID again.

– When this Player is reset, its remote control ID will 

be ID1.

30°

30°