Yamaha BD-A1040BL Manual Do Utilizador

■ General Setting

The default settings are marked with “ 

 

”.

Sets the power-saving function to on/off.
When set to on, this Player will switch to screen saver 
mode if there is no operation for 5 minutes. After that, this 
Player will turn to standby mode when there is no 
operation for 15 minutes.

You can set the Player to receive control signal from a 
TV/AV receiver compatible with the HDMI Control 
function via an HDMI cable (p. 12).

You can reset all settings of this Player to default setting 
except Security setting (p. 35). For details on default 
settings, see pages 31–39.

You can upgrade the software manually from USB 
Storage or Network. For details on software upgrade, refer 
to “Software upgrade” (p. 42).

You can select whether to display the message on the 
screen when this Player detects newer software over the 
Internet.

You can turn on or off a warning message concerning 3D 
video playback that appears on the TV when this Player is 
turned on.

You can check the free space of USB memory device 
connected to this Player, or format (empty) the “BUDA” 
folder in the USB memory device connected to this Player 
by selecting Format.

– To enjoy the BD-Live feature (p. 30), you need to 

connect a USB memory device (with at least 2GB of 
free space) to one of the USB connectors (front/rear) 
of this Player to use the USB memory device as 
Local Storage.

You can perform Easy Setup (p. 19).

You can select the language for On Screen Display which 
is the messages or menu displayed on the screen such as 
SETUP menu.

Pyccкий, 中文

You can prioritize the language for disc menu.

English, Français, 中文 , Español, Deutsch, Italiano, 

You can prioritize the audio language for Blu-ray Disc/
DVD playback. For details on setting items, see “Menu” 
(p. 34).

Using the HDMI Control function, you can interactively 
operate this Player with your TV (HDMI Control 
function supported).
When you connect this Player to the TV compatible with 
the HDMI Control function using an HDMI cable and 
set HDMI Control in the SETUP menu to on (p. 34), you 
can perform the function listed below.

• Automatic input select function

When you start playback of this Player, the input 
selector of the TV (and an AV receiver if this Player is 
connected to the TV via the AV receiver) is switched 
to this Player automatically. TV Power is turned on 
automatically depending on the TV.

• Automatic power off function

When you turn off the TV while this Player is in stop 
mode and the SETUP menu screen is not displayed, 
the power of this Player is also turned off 
automatically. 

– HDMI Control function may not work properly 

depending on the TV.

– Functions other than ones shown above may work 

depending on the TV or AV receiver.

– In order to make the HDMI Control function 

available, set up settings for the HDMI Control 
function on ALL components (this Player, TV, 
and AV receiver). Certain operation may also be 
required.

– Each function may be set independently to 

activate/deactivate depending on the TV.

– Refer to the operation manuals supplied with the 

TV and/or AV receiver for details regarding setup.

– When set to on, power consumption during 

standby mode increases due to HDMI Control 
function.