Panasonic AG-HMC152EN Manual Do Utilizador

78

 ( 

 ):  Skip (reverse skip)

 ( 

 ):  

Fast forward/fast playback 
(Rewind/fast reverse playback)

 (   ):    Paused in final scene (paused in 

initial scene)

Self-portrait recording display
No display:  Cannot record (no card, etc.)

 :   Recording in progress, during transition to 

the recording pause mode

 :   Recording paused (recording standby)

   : Warning display

Displayed when camera is set to standby mode

Displayed when the PREREC MODE item on 
the settings menu RECORDING SETUP screen 
is set to ON.

P- will be displayed on the screen.

When you press the AUDIO MON/ADV button, 
the sound volume output from the built-in 
speaker and headphone jack is displayed.

The range of the zone is indicated by the 
SAFETY ZONE item (Page 94) on the 
DISPLAY SETUP screen.

This indicates the position which is 
cropped to 4:3.

This indicates the range (90%) in which 
signals can be displayed by an ordinary 
homeuse TV set.

Will not be displayed in LCD monitor or 
viewfinder when the FOCUS ASSIST item on 
the settings menu SW MODE screen is set to 
EXPANDED.

•

During shooting, pressing the ZEBRA button 
once or twice will display the marker.

Displayed when Optical Image Stabilizer is ON.

26  Scene filename display (Page 50)
27  Remaining battery capacity display

When using Panasonic-manufactured batteries 
compatible with this product, the remaining 
battery capacity is displayed in minutes.
Time remaining will be displayed after a brief 
pause.

The battery display will change

→

→

→

→

as battery capacity decreases. 

 will be 

displayed in red when less than 3 minutes 
are remaining, and 

 will flash when the 

battery is empty. 
Remaining battery capacity may not be 
displayed correctly when using in high or 
low temperatures, or when the battery has 
not been used for a long period of time. 
To ensure that remaining battery capacity 
is displayed correctly, use the battery 
completely from a fully-charged state, and 
charge the battery again. (Remaining battery 
capacity may still not be displayed correctly if 
the battery has been used for long periods in 
high or low temperatures, or if the battery has 
been recharged a large number of times.)
The remaining battery capacity display is 
a guideline and may change according to 
usage conditions.
The remaining battery capacity display will 
momentarily disappear when switching 
between modes, when conducting REC 
CHECK operations or when changing the LCD 
brightness since the capacity is recalculated at 
these times.
Not displayed when using AC adapter.

REC:   Recording
PAUSE:   Recording standby
CHK: 

   Rec 

check

 :    Playback

 :    Playback 

paused

Playback paused at INDEX 
position

   (     ):  Frame-by-frame playback 

(Frame-by-frame reverse 
playback)

•

•

•

•

•