Hitachi CU-HD1500 Manual Do Utilizador
17
Cable check, Warning indication
Cable check
CU-HD1500 automatically checks the condition of optical cable, and shows the results on both PIX OUT
screen and LED indicators on front panel at start-up. If any troubles are detected, the camera power might
be forced to shut down for safety.
screen and LED indicators on front panel at start-up. If any troubles are detected, the camera power might
be forced to shut down for safety.
Indication
Content
Screen:
CHECK CAMERA CABLE
CAMERA CABLE SHORT
CAMERA CABLE:HYBRID
LED:
SHORT lights
The power line may be short-circuited.
Camera power defaults to off and camera power switch is
rendered inoperative.
Cable mode is Selected the HYBRID.
Camera power defaults to off and camera power switch is
rendered inoperative.
Cable mode is Selected the HYBRID.
Screen:
CAMERA CABLE OPEN
CAMERA CABLE:HYBRID
LED:
OPEN lights
Cable is not connected.
Camera power defaults to off and camera power switch is
rendered inoperative.
Cable mode is Selected the HYBRID.
Camera power defaults to off and camera power switch is
rendered inoperative.
Cable mode is Selected the HYBRID.
Screen: CHECK CAMERA CABLE
CAMERA CABLE SHORT
CAMERA CABLE:SINGLE
LED:
SHORT lights
The power line may be short-circuited.
Camera power defaults to off and camera power switch is
rendered inoperative.
Cable mode is Selected the SINGLE.
Camera power defaults to off and camera power switch is
rendered inoperative.
Cable mode is Selected the SINGLE.
Screen: CAMERA CABLE OPEN
OR CHECK CAMERA POWER
CAMERA CABLE:SINGLE
LED:
OR CHECK CAMERA POWER
CAMERA CABLE:SINGLE
LED:
OPEN lights
Cable is not connected.
Camera power defaults to off and camera power switch is
rendered inoperative.
Cable mode is Selected the SINGLE.
Camera power defaults to off and camera power switch is
rendered inoperative.
Cable mode is Selected the SINGLE.
Screen: CCU FAN ALARM!!
FAN warning of CCU
The internal fan is stopped or the rotating speed is lowered.
The internal fan is stopped or the rotating speed is lowered.
Screen: CAMERA FAN ALARM!!
FAN warning of camera head or camera adaptor
The adaptor internal fan is stopped or the rotating speed is
lowered.
The adaptor internal fan is stopped or the rotating speed is
lowered.
Screen: CCU OPT WARNING!
LED: YELLOW in CCU OPT LEVEL
lights
LED: YELLOW in CCU OPT LEVEL
lights
The optical receiver level of CCU is low.
Check a fiber cable, and clean the terminal if necessary.
Check a fiber cable, and clean the terminal if necessary.
Screen: CCU OPT ALARM !
LED: RED in CCU OPT LEVEL lights
LED: RED in CCU OPT LEVEL lights
The optical receiver level of CCU is very low.
Check a fiber cable, and clean the terminal if necessary.
Check a fiber cable, and clean the terminal if necessary.
Screen: CAMERA OPT WARNING!
LED: YELLOW in HEAD OPT LEVEL
lights
LED: YELLOW in HEAD OPT LEVEL
lights
The optical receiver level of camera head is low.
Check a fiber cable, and clean the terminal if necessary.
Check a fiber cable, and clean the terminal if necessary.
Screen: CAMERA OPT ALARM !
LED: RED in HEAD OPT LEVEL
lights
LED: RED in HEAD OPT LEVEL
lights
The optical receiver level of camera head is very low.
Check a fiber cable, and clean the terminal if necessary.
Check a fiber cable, and clean the terminal if necessary.
LED: GL blinks
It blinks, when the synchronized signal of the format at the time of
use and a different format is inputted.
use and a different format is inputted.