Toshiba ik-tf7u Manual Do Utilizador
23
• Serial baud rate setting 9600, 19200
-- OPTION --
BAUD RATE
9600
Move up down
by pushing
MENU UP, DOWN
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
value by pushing
DATA UP, DOWN
(4. 5) Changing the shading correction mode
1
Move the "
→
" to SHAD. by pushing [MENU UP], [MENU DOWN] buttons.
2
Select the SHAD. by pushing [DATA UP], [DATA DOWN] buttons.
Note: The alignment value for shading is fixed to "0" when selecting SHAD. OFF. MANU is not dis-
played in the menu.
(4. 6) Changing the manual shading correction setting
1
Move the "
→
" to MANU by pushing [MENU UP], [MENU DOWN] buttons.
2
Adjust the MANUAL SHADING by pushing [DATA UP], [DATA DOWN] buttons.
( 6 ) OPTION
(6. 1) Changing serial communication baud rate
1
Move the "
→
" to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.
• H PHASE adjustment -100 to 100
• Sync system display
-- SYNC --
MODE EXT
H PHASE
H PHASE
0
Move up down
by pushing
MENU UP, DOWN
by pushing
MENU UP, DOWN
Select the desired
value by pushing
DATA UP, DOWN
value by pushing
DATA UP, DOWN
(5. 1) Adjusting horizontal phase
1
Move the "
→
" to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
2
Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
( 5 ) SYNC
When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external
sync) automatically.
sync) automatically.