Kodak E-2549 Manual Do Utilizador

Film & Photofinishing Systems Group

EASTMAN KODAK COMPANY • ROCHESTER, NY 14650

Revised 8-07
Printed in U.S.A.

Using the KODAK PROFESSIONAL 
READYLOAD Single-Sheet Packet
KODAK Publication No. E-2549

To unload the film from the packet for processing, follow 
these steps:

Handle exposed film in total darkness. To avoid getting 

fingerprints on the film, wear cotton or nylon gloves when 
you unload it for processing.

1. Remove or tear the "Exposed" sticker.

2. Grasp both ends of the metal clip with one hand. 

Grasp the other end of the packet with your other 
hand. Tug gently to unseat the clip from the outer  
envelope. Pull the film assembly out of the outer 
envelope.

3. Hold the film assembly so that the base side is up. 

(The leader and trailer are attached to the base side of 
the film.) Peel away the trailer and clip.

4. Peel the leader away from the film. 

Note: It is generally easier to peel the leader and trailer 
from the film rather than peel the film from the leader/
trailer.

5. Process the film as you normally do.

6. Save the cover envelope if you made notes on it.

Kodak has many publications to assist you with 
information on Kodak products, equipment, and materials.

Additional information is available on the Kodak website 

and through the U.S.A./Canada faxback system.

The following publications are available from Kodak 

Customer Service, from dealers who sell Kodak products, 
or you can contact Kodak in your country for more 
information.

For the latest version of technical support publications for KODAK 

PROFESSIONAL Products, visit Kodak on-line at:

  

If you have questions about KODAK PROFESSIONAL Products, 

call Kodak.

In the U.S.A.: 

1-800-242-2424, Ext. 19, Monday–Friday

9 a.m.–7 p.m. (Eastern time)

In Canada: 

1-800-465-6325, Monday–Friday

8 a.m.–5 p.m. (Eastern time)

E-190

E-163

F-4016

Kodak, Kodak Professional, Ektachrome, 
Portra, Readyload, and T-Max are trademarks.