Canon 1D MK IV Manual Do Utilizador

79

If EU is not operating correctly, see the items below.



You cannot install software unless you are logged into an account 
with Administrator privileges. Log in again into an account with 
Administrator privileges. 
For how to log in and how to specify Administrator settings, refer to 
the User’s Manual for the Macintosh computer or for Mac OS X.



If you installed other software and EU no longer automatically starts 
up even if you connect your camera and computer, use the Image 
Capture (standard Macintosh software) settings to set the software 
that starts up at camera connection to [Camera Window] or [EOS 
Utility]. This must be set for each camera you will connect. You can 
disable EU from starting up automatically by selecting an option other 
than [Camera Window] or [EOS Utility]. 



Depending on the card reader and computer OS used, SDXC cards 
might not be correctly detected. In such a case, connect your camera 
and computer with the provided interface cable, and transfer the 
images to your computer.



EU does not operate correctly on a computer if its system 
requirements are not met. Use EU on a computer with compatible 
system requirements 

.



Push the plug of the interface cable all the way into the socket. Loose 
connections can cause faults and malfunctions 

.



Check that the camera’s power switch is < ON > 

.



EU and the camera may not communicate normally with a cable other 
than the EOS DIGITAL camera-dedicated Canon interface cable 

.



Connect your camera and computer directly with the interface cable 
provided with your camera. Do not connect the camera via a hub; 
doing so may prevent EU and your camera from communicating 
normally.



If you connect multiple USB devices (not including the mouse or 
keyboard) to your computer, the camera may not communicate 
normally. If the camera cannot communicate normally, disconnect 
USB devices other than the mouse or keyboard from your computer.



Do not connect more than one camera to the same computer. Two or 
more cameras may not operate normally.



Do not connect your camera with the computer while performing 
“Linked shooting” with a WFT series Wireless File Transmitter (sold 
separately). Your camera may not operate normally.



If there is insufficient charge left in the camera battery, the camera 
cannot communicate with EU. Either replace with a fully charged 
battery or use the AC adaptor kit provided with your camera. Your 
computer does not supply power to the camera through the interface 
cable.

COP

Y