Ricoh RICOH WG-4 GPS Manual Do Utilizador
202
7
C
o
n
n
ec
ting t
o
a C
o
mpu
ter
Transferring Images Using an Eye-Fi
Card
You can transfer images to your computer or similar devices automatically when
a built-in wireless LAN memory card (Eye-Fi card) is inserted in the camera.
a built-in wireless LAN memory card (Eye-Fi card) is inserted in the camera.
1
Specify the wireless LAN access point and transfer
destination on the Eye-Fi card.
destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual supplied with
the Eye-Fi card.
the Eye-Fi card.
2
Turn the camera off.
3
Insert the Eye-Fi card into the camera.
4
Turn the camera on.
5
Select O (On) for [Eye-Fi] in the [W Setting] menu.
The images are transferred automatically. For details on how to set up the
camera, refer to “Setting the Eye-Fi Communication” (p.181).
One of the following icons will appear on the display.
camera, refer to “Setting the Eye-Fi Communication” (p.181).
One of the following icons will appear on the display.
Communicating
When [Eye-Fi] is set to O and the camera is connected to an
access point or is searching for an access point
Waiting for communication
When [Eye-Fi] is set to O and is not connected to an access point
Eye-Fi communication is not allowed
When [Eye-Fi] is set to P (Off)
Version error
When the version of the Eye-Fi card is out of date or the card is
write-protected
When [Eye-Fi] is set to O and the camera is connected to an
access point or is searching for an access point
Waiting for communication
When [Eye-Fi] is set to O and is not connected to an access point
Eye-Fi communication is not allowed
When [Eye-Fi] is set to P (Off)
Version error
When the version of the Eye-Fi card is out of date or the card is
write-protected
• Endless Memory Mode is not supported.
• Update the Eye-Fi card firmware as necessary before using the card.
• Update the Eye-Fi card firmware as necessary before using the card.