Ricoh RICOH WG-4 GPS Manual Do Utilizador

3

1

Press the four-way controller (4) 
in A mode.

The [Flash Mode] screen appears.
The flash mode changes each time the 
button is pressed. You can also change the 
setting using the four-way controller (23).

The 3 button function varies depending on the screen. Refer to the 
guide indications.

 Exit

Exits the menu and returns to the original screen.

Returns to the previous screen with the current settings.

 Cancel

Cancels the current selection, exits the menu and returns 
to the previous screen.

,

Auto

The flash discharges automatically depending on the light 
conditions.

a

Flash Off

The flash does not discharge, regardless of the brightness. 
Use this mode to take pictures where flash photography is 
prohibited.

b

Flash On

The flash discharges for each shot regardless of the 
brightness.

c

Auto + Red-eye

This mode reduces the red-eye phenomenon caused by the 
light from the flash being reflected in the subject’s eyes. The 
flash discharges automatically.

d

Flash On + 
Red-eye

This mode reduces the red-eye phenomenon caused by the 
light from the flash being reflected in the subject’s eyes. The 
flash discharges regardless of the light conditions.

• The available modes differ depending on the selected shooting mode, 

focus mode or drive mode. Refer to “Functions Available for Each Shooting 
Mode” (p.204) for details.

• If you use the Face Detection function when , is selected, the flash mode 

is automatically set to d.

• A pre-flash discharges when using the red-eye reduction function.

Using the flash when capturing images at a close distance may cause 
irregularities in the image due to the light distribution.