Ricoh RICOH WG-5 Manual Do Utilizador

Página de 244
142
4
Pl
ay
in
g Bac
k
 an
d Del
e
ting
 I
m
ages
1
Turn the AV device and camera off.
2
Slide the battery cover lock as indicated by 1, and release the 
lock.
3
Slide the release latch as indicated by 2, and open the battery 
cover towards 
3.
4
Connect the AV cable to the USB/AV terminal.
5
Connect the other ends of the AV cable (yellow: video, white: 
audio) to the video input terminal and audio input terminal of 
the AV device.
When using stereo sound device, insert the sound terminal into the L (white) 
terminal.
6
Turn the AV device on.
When the device that the camera is connected to and the device that plays back 
images are different, turn both devices on.
When viewing images on AV device with multiple video input terminals (such as 
a TV), refer to the operating manual of the device and select the video input 
terminal to which to connect the camera.
7
Turn the camera on.
• Depending on the country or region, images may fail to be played back if 
the video output format is set different from the one in use there. If this 
happens, change the video output format setting (p.179).
• The camera’s AV output is output at normal resolution.
To watch movies shot at 
 or M at HDTV resolution, output the 
movies as HDMI or transfer them to a computer (p.143).
Close the battery cover securely when not using the terminal.
<How to close the battery cover>
Close the cover, slide the release latch in the opposite direction indicated by 
2
, and then slide the battery cover lock in the opposite direction indicated by 
1
 until it clicks.