Ricoh RICOH WG-4 Manual Do Utilizador

3

Pictures are taken continuously as long as the shutter release button is pressed.

* The number of images that can be shot continuously and the interval between shots 

depend on shooting situations.

1

Press the four-way controller (2) in A mode.

The [Drive Mode] screen appears.

2

Use the four-way controller (45) to select j or c and press 
the 4 button.

The camera is ready for taking pictures continuously.

3

Pictures are taken continuously as long as you keep the shutter release button 
pressed.

j

Continuous 
Shooting

Each time a picture is taken, the image is saved in the memory 
before the next image is taken. The higher the image quality, 
the longer the interval between shots.

c

Burst 
Shooting

The number of recorded pixels is fixed at f/

 and the 

interval between shots is shorter than “Continuous Shooting”.

j

/c cannot be selected in some shooting modes. Refer to “Functions 

Available for Each Shooting Mode” (p.204) for details.

• With j, you can continue shooting until the capacity of the SD Memory 

Card or built-in memory becomes full.

• The shooting interval of j varies according to the [Recorded Pixels] and 

[Quality Level] settings.

• The focus, exposure and white balance are locked with the first shot.
• When the Face Detection function is activated (p.99), it works only when 

taking the first shot.

• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed to f or  

in 

c mode. When 

the shooting mode is set to 

 (Report), the number of recorded pixels is 

fixed to 

V.