Panasonic HC-V520 Manual Do Utilizador
- 130 -
∫ When connecting by [Manual Setting]
1
Touch [Manual Setting].
2
Touch [INPUT], then Enter the SSID of the wireless access point.
≥ For details on how to enter characters,
refer to
page
≥ When the entry is complete, touch [Enter].
3
Touch [NEXT], and then touch the desired Network authentication method.
≥ When [WEP] is selected, proceed according to step 5.
4
Touch the desired Encryption method
≥ If you select [NONE], a message is displayed after completing the connection.
5
(When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], the enter the Password.
Touch [INPUT], the enter the Password.
.
≥ When the entry is complete, touch [Enter].
6
Touch [NEXT]
≥ A message is displayed when the connection is complete.
≥ Check the wireless access points instruction manual and settings when a saving wireless access
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
≥ If no connection can be established, the wireless access point’s radio waves may be too weak.
Refer to
) and
“
”
(
) for details.
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Network authentication type
Encryption types that can be set
[Open]
[NONE]/[WEP]
[WEP]
There is no setup of an encryption types.
[WPA-PSK]/[WPA2-PSK]
[
TKIP
]/[
AES
]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j
j
is displayed on the screen
When the preparations for the Wi-Fi function (
) and the Wi-Fi connection are
complete, you can use the following functions:
j [Link to Cell] (
j [DLNA Play] (
)
j [Live Cast] (
j [Home Cam] (