Panasonic SDR-SW20PC Manual Do Utilizador
34
VQT1M21
Recording
2
Automatic recording
(motion pictures)
(motion pictures)
1
Set to [
].
2
Press
.
3
Start recording.
Recording
mode
mode
Time elapsed
Time remaining (flashes
red when under 1 minute)
red when under 1 minute)
Recording in
progress (red)
progress (red)
Recording continues even if the
LCD monitor is closed.
LCD monitor is closed.
4
Stop recording.
Paused (green)
The unit is still recording if [ ] is
red. Do not move the unit.
red. Do not move the unit.
When the unit is running on battery power, power is automatically shut OFF
to conserve battery life if no operations are performed for about 5 minutes. To
reuse the unit, set the mode dial to [OFF] and then reselect a mode.
To prevent power from shutting OFF automatically: (P.84 [POWER SAVE])
reuse the unit, set the mode dial to [OFF] and then reselect a mode.
To prevent power from shutting OFF automatically: (P.84 [POWER SAVE])
The interval between starting and stopping recording is recorded as one single
scene. The counter is reset to “0h00m00s” after each scene.
At the time when the unit is purchased, the audio recording mode is set to
[DOLBY]. For playback in a device which does not support Dolby Digital, set
[AUDIO REC] to [MPEG]. (P.84)
[AUDIO REC] to [MPEG]. (P.84)
To change aspect ratio to 4:3
[ADVANCED]
[ASPECT][4:3]
Default aspect ratio at the time of
purchase is set to 16:9 (widescreen).
purchase is set to 16:9 (widescreen).
To remove sound when record
button is pressed
button is pressed
[SETUP]
[BEEP SOUND][OFF]
To remove on-screen display
[SETUP]
[DISPLAY][OFF]