Panasonic AJ-PX5000G Manual Do Utilizador

– 168 –

[LINE&FREQ]

Sets the system number of lines and frequency, recording format, and audio 

quantizing bit quantity. When the number of lines and frequency are selected, 

only the items that can be selected for those frequencies are displayed. If the 

frequency is changed, the device must be restarted. If a restart is required, a 

confirmation dialog will be shown.

 

f

The setting values are saved together with the 

settings of [REC FORMAT] and [AUDIO SMPL 

RES] on each setting of [LINE&FREQ]. When 

the settings of [LINE&FREQ] are restored to the 

previous settings, these items are reset to the 

previous settings at the time.

Selects the number of lines 1080P and system frequency 

59.94 Hz.

Selects the number of lines 1080P and system frequency 

50 Hz.

Selects the number of lines 1080i and system frequency 

59.94 Hz.

Selects the number of lines 1080i and system frequency 50 Hz.

Selects the number of lines 480i and system frequency 

59.94 Hz.

Selects the number of lines 576i and system frequency 50 Hz.

[REC FORMAT]

Select the recording codec.

 

f

[AVC-G50] and [AVC-G25] cannot be selected in 

the following cases.
-  When the main menu → [REC/PB] → [REC 

FUNCTION] → [RECORDING] is set to other 

than [NORMAL]

Selects AVC-Intra 100.

Selects AVC-Intra 50.

Selects AVC-LongG 50.

Selects AVC-LongG 25.

Selects DVCPRO HD (100 Mbps).

Selects DVCPRO50 (50 Mbps).

Selects DVCPRO (25 Mbps).

Selects DV (25 Mbps).

[AUDIO SMPL RES]

If the recording format is AVC-Intra 100/AVC-Intra 50, selects number of the audio 

recording quantizing bits.

 

f

When the recording format is AVC-LongG 50 

or AVC-LongG 25, select [24BIT]. When the 

recording format is DVCPRO HD, DVCPRO50, 

DVCPRO, or DV, select [16BIT].

 

f

Clips recorded at 24-bit should be played back 

using a 24-bit compatible P2 device or P2 Viewer 

Plus. The clip numbers of P2 devices that are 

not 24-bit compatible are displayed in red and 

cannot be used for playback. Audio does not play 

back correctly on a P2 Viewer that is not 24-bit 

compatible. Always use the latest P2 Viewer Plus 

version.

 

f

For 24-bit compatible P2 devices and the latest 

P2 Viewer Plus information, visit the P2 support 

page on the following website.
http://pro-av.panasonic.net/

16-bit is the audio recording bit quantity.

24-bit is the audio recording bit quantity.

[REC SIGNAL]

Switches the video input signal.

 

f

Once the power is turned off, it is always set to 

[CAM] the next time power is turned on.

Record signal from the camera

Record input from the <SDI IN> terminal

[ASPECT]

Selects the aspect ratio to record. (Only in SD)
[16:9]

Recorded using the 16:9 aspect ratio.

Recorded using the 4:3 aspect ratio.

[SCAN REVERSE]

Sets whether to use function to correct video when using an anamorphic lens or 

film lens.
[ON]

Corrects video. Inverts the top, bottom, left and right sides of a 

video.

Does not correct video.

         are factory settings.

[SETUP(7.5%)]

Switches the setup.
[ON]

Setup 7.5% is on.

Setup 7.5% is off.

[P.OFF LCD DISPLAY] Selects whether to set the time code of window display or display the count when 

the power is off.
[ON]

Sets and displays time code even when the power is off.

Settings and display on the display window are not available 

while the power is off.

         are factory settings.