Pentax WG-10 Manual Do Utilizador

7

You can save battery power by setting the display to dim automatically 
when no operation is performed for a fixed time. After the power saving 
function has been activated, the display returns to the ordinary 
brightness if any button is pressed.

1

Press the 3 button in Q mode.

The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way 
controller (5) once.

2

Use the four-way controller (23) to select [Power 
Saving].

3

Press the four-way controller (5).

A pull-down menu appears.

4

Use the four-way controller 
(23) to select the time until 
the camera enters power 
saving mode.

Choose from [2min.], [1min.], [30sec.], 
[15sec.], [5sec.] or [Off].

5

Press the 4 button.

The setting is saved.

• Power Saving does not function in the following situations:

- While taking pictures in the continuous shooting mode
- In the playback mode
- During movie recording
- While the camera is connected to a computer
- When using the AC adapter
- While a menu is being displayed
- In the 

 (Digital Microscope) mode

• When no operation is performed after the camera is turned on, Power 

Saving is activated only after 15 seconds elapse even if [5sec.] is set.