Pentax WG-10 Manual Do Utilizador
34
1
Gettin
g
Sta
rte
d
Use the rechargeable lithium-ion battery D-LI92 that is provided with the
camera. Charge the battery before using it in the camera for the first
time.
camera. Charge the battery before using it in the camera for the first
time.
1
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide
the cover towards 2 and open it towards 3.
the cover towards 2 and open it towards 3.
• Do not charge batteries other than the rechargeable lithium ion D-LI92
battery using the supplied D-BC92 battery charger. Doing otherwise
may cause damage or overheating.
may cause damage or overheating.
• The battery has reached the end of its service life when it starts to run
down soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to
light, the battery may be faulty. Replace it with a new battery.
The time required to fully charge the battery is about 120 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging
the battery is 0°C to 40°C (32°F to 104°F).
Installing the Battery
Battery/card cover
lock lever
lock lever
Battery lock lever
Battery/card
cover
cover
Battery