Pentax WG-10 Manual Do Utilizador

3

You can use the remote control (optional) to take pictures while you are 
away from the camera.

1

Press the four-way controller (2) in A mode.

The [Drive Mode] screen appears.

2

Use the four-way controller (45) to select i and press 
the four-way controller (3).

• With j, you can continue shooting until the memory capacity of the 

SD Memory Card or built-in memory is full.

• The interval of j varies according to the [Recorded Pixels] and 

[Quality Level] settings.

• The focus, exposure and white balance are locked with the first shot.
• When the Face Detection function is activated (p.71), it works only 

when taking the first shot.

• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed at f/

 

in  c mode. When 

the shooting mode is set to 

 (Report), the number of recorded 

pixels is set to 

V (1280×960).

i

3-sec Remote 
Control

The shutter will be released after about three seconds when 
the shutter release button on the remote control unit is pressed.

h

0-sec Remote 
Control

The shutter will be released immediately when the shutter 
release button on the remote control unit is pressed.

Four-way controller
4 button

Shutter release 
button