Panasonic AG-TL950 Manual Do Utilizador

10

#

[RESET/CANCEL] button
• In the Timer Program Setting mode, press this button to

cancel the program settings.  For details, refer to “Timer
Recording” on page 36.

• Also press this button to interrupt alarm recording or to

reset the alarm input data or power loss (power failure)
data.  For details, refer to pages 21 and 39.

• Resets the seconds in the currently displayed time to 00

when pressed together with the 

$

 [CNT RESET] button

(except in menu setting mode).
- When the seconds value is 29 or less, the minutes value

is the same but the seconds value is reset to 0. (eg.
12:34:29 

[

 12:34:00)

- When the seconds value is 30 or more, the seconds value

is reset to “00” and the minutes value is increased by one.
(e.g. 12:34:30 

[

12:35:00)

$

[CNT RESET] button
When the display shows the control tape counter or reel tape
counter, press this button to reset to “00

H

00

M

00

S

” or “0000”.

%

[LOCK] button
Press to activate the operation lock function.

^

Selects which data — current time, control tape counter
(00

H

 00

M

 00

S

 — 23

H 

59

M 

59

S

) or reel tape counter (0 —

9999) — is displayed.  Each time this button is pressed, the
display switches to the next item.

&

[SEARCH] button
Use to search the alarm recorded section or a section
recorded at a specified date and time.  In the Stop mode,
select the search mode by pressing this button.
• Press once to engage the Alarm Search mode.
• Press twice to engage the Alarm Scan mode.
• Press three times to engage the Date/Time Search mode.
• Press four times to release the search mode.

After the search mode is selected with this button, press
the [FF] or [REW] button to execute the search operation
in the selected mode.
For details, refer to page 49.

*

[TIMER] button
Normally use this button for timer recording.  For details,
refer to “Timer Recording” on page 31.

 AG-

(

[V. LOCK +/–] buttons
Press to reduce vertical picture jitter in the Still, Field
Advance Playback and Linear Slow Timelapse Play  modes.

)

[TRACKING +/–] buttons
If picture noise appears during play or field advance, press
these buttons to adjust tracking so that noise is reduced.
When the [+] and [–] buttons are pressed simultaneously,
tracking is reset to the preset level.

* You cannot make any tracking adjustment at L12H and

L24H Linear Slow Time-lapse Playback modes.

q

[FF] button
• Press to fast-forward the tape.
• Starts fast-forward search when pressed in the Play mode.
• Starts forward alarm search or date/time search when the

Search mode is specified with the 

&

 [SEARCH] button.

• Also controls field-by-field playback in the forward direction.

w

[PLAY] button
• Press to play back the tape.

e

[PAUSE/STILL] button
• Engages the Record-Pause mode when pressed in the

Record mode.

• Displays a still picture when pressed in the Play mode.
• Field advance or reverse playback is executed each time

the [FF] or [REW] button is pressed while pressing this
button in the Still mode.  (When the [FF] or [REW] button
is pressed for more than 2 seconds, Continuous Field
Advance Playback mode is engaged.  After about 3
minutes, the Stop mode is engaged.)

r

[REV PLAY] button
Starts reverse playback when pressed in any mode except
Record, Record-Pause and Record Check.

t

[REW] button
• Press this button to rewind the cassette.
• Starts rewind search when pressed in the Play mode.
• Starts reverse alarm search or date/time search when

the Search mode is specified with the 

&

 [SEARCH] button.

• Also controls field-by-field playback in the reverse direction.

y

[HDR] indicator
Lights in the HDR recording and HDR playback modes.
* HDR: High Density Recording
• For details on HDR recording, refer to page 28.