Panasonic HDC-HS900 Manual Do Utilizador

Página de 159
- 130 -
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed 
with any other USB cables.)
≥ When the unit is connected to a PC, it cannot be turned off.
Disconnect the USB cable, before turning this unit off.
≥ When performing reading/writing between a PC and an SD card, be aware that some SD 
card slots built into PCs and some SD card readers are not compatible with the SDHC 
memory card or SDXC memory card.
≥ When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
∫ To disconnect USB cable safely
Select the 
 icon in task tray displayed on the PC, and then click [Eject Panasonic 
Camcorder].
≥ Depending on your PC’s settings, this icon may not be displayed.
About the screen indication of the unit
≥ Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp 
is on or card access icon (
) appears on the unit screen.
Do not disconnect the USB cable, the battery or the AC adaptor while the access lamp 
is on or built-in memory access icon (
) appears on the unit screen.
Do not disconnect the USB cable, the battery or the AC adaptor while the HDD access 
lamp is on or HDD access icon (
) appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC, 
disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the 
battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit 
back on. (Data may be destroyed when above operation is performed while accessing 
the SD card, built-in memory or HDD.) 
HDC-TM900
HDC-HS900