Panasonic DMC-LX100 Manual Do Utilizador

91

SQW0021

Picture effects (Filter)

Taking pictures using picture effects  (Filter)

You can easily adjust the setting conditions (such as degree and coloring of an effect) of 

the picture effects according to your preferences.

 •The settings that can be adjusted vary depending on the 

selected picture effect. Refer to “Items that can be set” for the 

corresponding picture effect.

 •Press [MENU/SET] to return to the recording screen.

 •When you select picture effects, [   ] appears on the screen.

 •If you do not want to change the current setting, select the center 

point (standard) in the adjustment level bar.

You can take two still pictures at the same time by pressing the shutter button once; one 

with effects and one without effects.

 •When [ON] is set, the camera will take a still picture with the effects applied and then a still picture 

without the effects.

 •A still picture recorded without effects applied will use the same menu settings as when the picture 

effects (Filter) were applied. The following settings are fixed.

 

– White Balance: [AWB] (You cannot perform fine adjustments.)

 

– [i.Dynamic]: [OFF]

 •After taking the picture, [Auto Review] will display only the still picture with the effects applied.

 

●

If you set this function to [ON], burst, Auto Bracket, Aspect Bracket, White Balance Bracket, [Time 

Lapse Shot], [Stop Motion Animation] and panorama picture recording will be disabled.

 

●

This function is disabled during motion picture recording.