Pentax WG-3 GPS Manual Do Utilizador

Página de 240
114
3
Ta
king
 Pict
ures
3
Press the shutter release button fully.
Recording starts. You can continue recording until the recorded movie time 
reaches 25 minutes.
Saving a still picture during movie recording
• If you press the 4 button during movie recording, the frame captured at the 
moment you pressed the 4 button is recorded as a still picture.
• A still picture is recorded with the default settings made in the [A Rec. Mode] 
• Up to three still pictures can be recorded per each continuous movie 
recording.
• The recorded still pictures will be saved when the movie recording is stopped.
• Still picture capture with the 4 button is not available when the number of 
recorded pixels and frame rate settings are set to 
.
• The angle of view may change, depending on the number of recorded pixels 
for movies.
• The image may be distorted, depending on recording conditions.
4
Press the shutter release button fully.
Recording stops.
• You can use the optical zoom and autofocus functions while recording 
movies when [Enable Autofocus] (p.118) and [Enable Optical Zoom] 
(p.118) are set to O (On) in the [C Movie] menu. However, operation noise 
is recorded in the movie.
• The focus mode can be changed before recording starts.
• When the focus mode is set to \(Manual Focus), you can adjust the 
focus before recording starts and during recording.
• When the shooting mode is set to C (Movie), Face Detection is 
automatically set to on. You can select Smile Capture or Face Detection Off 
before starting recording a movie (p.100). When the Smile Capture function 
is activated, movie recording starts automatically when the camera 
recognizes the subject’s smile. However, the Smile Capture function may 
not work depending on the condition of the recognized faces, and movie 
recording may not start automatically. If this happens, press the shutter 
release button to start movie recording.
• You can record a movie using a remote control unit (optional) (p.77)
• When you use the SD Memory Card, use SD Speed Class 4 or higher 
cards.