Panasonic AG-AC7P Manual Do Utilizador

Página de 116
50
VQT3Q78
When you start recording, the image/audio gradually 
appears. (Fade in)
When you pause recording, the image/audio gradually 
disappears. (Fade out)
≥ The fade setting is canceled when the recording stops.
∫ To select the color for fade in/out
: [RECORD SETUP] 
# [FADE COLOR] # 
[WHITE] or [BLACK]
≥ The thumbnails of scenes recorded using fade in become black (or white).
This brightens parts that are in shadow and difficult to see and suppresses white 
saturation in bright parts at the same time. Both bright and dark parts can be recorded 
clearly.
≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not 
be clear.
This allows recording of the pictures and sound to start approximately 3 seconds 
before the recording start/stop button is pressed.
 appears on the screen.
≥ Aim the unit at the subject beforehand.
≥ There is no beep sound.
≥ PRE-REC is canceled in the following cases.
j If you change the mode.
j If you remove the SD card.
j If you press the MENU button.
j If you turn the unit off.
j If you start recording.
j After 3 hours have passed
≥ After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken 
3 seconds before pressing the recording start/stop button cannot be recorded.
≥ Images displayed on the thumbnail in playback mode will differ from the motion pictures 
displayed at the start of playback.
Fade
Intelligent contrast control
PRE-REC
This prevents you from missing a shot.
(Fade in)
(Fade out)
MENU
PRE-REC
PRE-REC
AG-AC7P-VQT3Q78_mst.book  50 ページ  2011年5月18日 水曜日 午後1時40分