Sony HDR-HC1VGSKIT2 Manual
60
HDR-HC1 2-631-458-11(1)
STANDARD SET menu (Continued)
* Appears only during tape playback.
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a “Memory Stick Duo” are played
back.
images on a “Memory Stick Duo” are played
back.
• appears for a picture recorded using a flash.
• In the DATE/TIME data display, the date and
• In the DATE/TIME data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.
REMAINING
AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
inserted.
• When you touch
(Play/Pause).
ON
Always displays the remaining tape
indicator.
indicator.
REMOTE CTRL (Remote control)
The default setting is [ON], allowing you to
use the Remote Commander (p. 34).
use the Remote Commander (p. 34).
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
remote control unit.
REC LAMP (Recording lamp)
The camera recording lamp will not light
up during recording when you set this to
[OFF]. (The default setting is [ON].)
up during recording when you set this to
[OFF]. (The default setting is [ON].)
BEEP
ON
A melody sounds when you start/stop
recording, or operate the touch panel.
recording, or operate the touch panel.
OFF
Cancels the melody.
– [TV TYPE] (p. 59)
– [VCR HDV/DV] (when setting the POWER
– [VCR HDV/DV] (when setting the POWER
switch to PLAY/EDIT) (p. 56)
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON]. The
frame is not recorded. Press DISPLAY/
BATT INFO to make the frame disappear.
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON]. The
frame is not recorded. Press DISPLAY/
BATT INFO to make the frame disappear.
• Pointing the subject at the cross point of the
guide frame makes a balanced composition.
COLOR BAR
You can display the color bar or record it
on the tape by setting [COLOR BAR] to
[ON]. It is convenient to adjust the color on
the monitor connected.
on the tape by setting [COLOR BAR] to
[ON]. It is convenient to adjust the color on
the monitor connected.
DATA CODE
During playback, displays the information
recorded automatically (data code) during
recording.
OFF
recorded automatically (data code) during
recording.
OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
0:00:00:00
60min
AWB
100
9dB
F1. 8
AUTO
1
2
2
3
4
5
6
SteadyShot off
*
Exposure
*
White balance
*
Gain
*
Shutter speed
Aperture value