Sony DSR-400L/400PL Manual Do Utilizador
16
Location and Function of Parts
Ch
apt
apt
er 1 Ov
e
rv
ie
w
i AUDIO IN (CH-1/CH-2) (audio channel 1/2 input
selection) switches
Select the audio input signals to be recorded on audio
channels 1 and 2. The audio input is sourced as explained
below based on the position of the switches.
FRONT: The microphone connected to the MIC IN (+48
channels 1 and 2. The audio input is sourced as explained
below based on the position of the switches.
FRONT: The microphone connected to the MIC IN (+48
V) connector (page 17)
WRR: A WRR-855 UHF Synthesized Tuner Unit (not
supplied)
REAR: Audio equipment connected to the AUDIO IN
CH-1/CH-2 connectors (page 19)
The following settings can be made on the AUDIO page of
the MAINTENANCE menu.
• Audio recording format
the MAINTENANCE menu.
• Audio recording format
Select either Fs48K or 32K.
• Audio reference level
Select either –12 dB or –20 dB (DSR-400/450WS), –12
dB or –18 dB (DSR-400P/450WSP).
dB or –18 dB (DSR-400P/450WSP).
• Audio fade-in/fade-out
Select either ON or OFF.
j REC TRIGGER (external VTR trigger) switch
Sets the function of the REC button on the camcorder or
the VTR button on the lens when an external VTR is
connected to the (i.LINK) DV OUT connector (page
19). Set this switch to INT ONLY when you need to do cut
editing or dubbing using the (i.LINK) DV OUT
connector.
PARALLEL: Operates both internal and external VTRs
Sets the function of the REC button on the camcorder or
the VTR button on the lens when an external VTR is
connected to the (i.LINK) DV OUT connector (page
19). Set this switch to INT ONLY when you need to do cut
editing or dubbing using the (i.LINK) DV OUT
connector.
PARALLEL: Operates both internal and external VTRs
simultaneously.
INT ONLY: Operates the internal VTR only. External
VTR operation is performed locally.
EXT ONLY: Operates the external VTR only.
k FRONT MIC LOW CUT switch
Set to ON to insert a high-pass filter in the microphone
circuit, reducing wind noise. Normally leave the switch in
the OFF position.
Set to ON to insert a high-pass filter in the microphone
circuit, reducing wind noise. Normally leave the switch in
the OFF position.
Left and upper view
Front section
a Accessory shoe
Attach an optional accessory such as a video light (page
34).
Attach an optional accessory such as a video light (page
34).
b ASSIGN 3/4 switches
You can assign the desired functions on the FUNCTION 1
page of the OPERATION menu.
You can assign the desired functions on the FUNCTION 1
page of the OPERATION menu.
c Viewfinder front-to-back position locking knob
Loosen this knob to adjust the front-to-back position of the
viewfinder (page 31).
Loosen this knob to adjust the front-to-back position of the
viewfinder (page 31).
d Shoulder strap fitting
Attach the supplied shoulder strap (page 33).
Attach the supplied shoulder strap (page 33).
e Viewfinder left-to-right positioning ring
Loosen this ring to adjust the left-to-right position of the
viewfinder (page 31).
Loosen this ring to adjust the left-to-right position of the
viewfinder (page 31).
1
Accessory shoe
2
ASSIGN 3/4 switches
3
Viewfinder front-to-
back position locking
knob
back position locking
knob
4
Shoulder strap fitting
5
Viewfinder left-to-right positioning ring
6
Viewfinder fitting shoe
9
Fitting for optional microphone
holder
holder
7
LIGHT connector
8
MIC IN connector